Ifor Powell Apps
IpSmartHr – Smart Extras™ 0.5.0
IpSmartHr is SmartWatch extension to displayheart rate data from an ANT+™ heart rate sensor on your SmartWatch.To be able to use IpSmartHr you need to have an ANT capable phoneor a USB host mode capable phone and a USB ANT stick. You alsoclearly need a SmartWatch and an ANT+ compatible heart rate sensor.IpSmartHr integrates with IpSensorMan so the heart rateinformation can be displayed at the same time as anotherapplication like IpBike or IpPeloton is also accessing the heartrate data.There are options to lock the display bright or dim or leave itin automatic mode. If you lock it your battery will drain fairlyquickly. Just touch the icons.Swipe up or down from the main heart rate screen to get the timescreen. Swipe left or right from the main heart rate screen for thesettings screen or the max heart rate setting screen.You can choose in the settings screen to have the HR displayedas a Percentage of your set max heart rate or as beats per minute.There is also an option to have the color of the heart rate textbased off your max heart rate, from green at half max or below tored at max.I request the Internet permission for the crash reporting systemI use and the analytics system. The analytics uses Flury and isanonymous, I am just interested in how the app is being used inorder to make improvements. There are options in the settingsscreen to switch off the crash reporting and the analytics if youwant to.LiveWare™ extension for SmartWatch
IpSmartAltimeter 0.5.0
IpSmartAltimeter is SmartWatch extension todisplay pressure sensor based altitude on your SmartWatch. To beable to use IpSmartAltimeter you need to have a phone with apressure sensor. Phones with pressure sensors include Sony Active,Sony GO, Galaxy Nexus, Galaxy Note or Galaxy S III. You alsoclearly need a SmartWatch.There are options to lock the display bright or dim or leave itin automatic mode. If you lock it your battery will drain fairlyquickly. Just touch the icons.Swipe up or down to switch from the altimeter screen to a timescreen.On start-up if the pressure has not been calibrated within 2hours then GSP based calibration is attempted.The GPS is started, if a good location if obtained within 2 minutesthis location is used to check the altitude cache.If there is an entry in the altitude cache it is used to calibratethe altimeter.If no cached entry is used then an online lookup is attempted forthe location.The resulting altitude and location are added to the cache and usedto calibrate the altitude.You can swipe left and right for the manual calibration screenand the settings screen.Press to toggle filtering on and off and units from as meters orfeet in the settings screen.In the manual calibration screen swipe up to delete the lastdigit, swipe down for zero.If the value is red then there is not currently a good location andthe calibration will not be added to the cache.If the value is green the location and manual altitude will beadded to the cache.Swipe right or left to set the altitude and exit the calibrationscreen.I currently consider this to be beta.Any problems please feel free to email [email protected] request the Internet permission for the crash reporting systemI use and the analytics system as well as for doing the onlinealtitude lookup. The analytics uses Flurry and is anonymous, I amjust interested in how the app is being used in order to makeimprovements. There are options in the settings screen to switchoff the crash reporting and the analytics if you want to.I request the gps permission to look up the location in order to doautomatic calibration. I stop looking up after two minutes if agood fix is not obtained.I request access to external storage to save the calibration cachedata.I request the network state to help deciding if an online altitudelookup is possible.LiveWare™ extension for SmartWatch
